MATERIAL: Conforms to SAE-AS81765/1.
SIZES: End caps come in sizes to cover cables ranging from 0.37″ to 3.5″ in diameter.
RELIABILITY: Seal moisture out and pressure in on all types of low and medium density polyethylene jacketed cable. A special design combined with a high-grade compound to form an ideal product that withstands the most severe environmental conditions.
TEMPERATURE: Cable pressure of 12 psi is maintained throughout thermal conditions ranging from 40° C to 60° C.
USES: Commonly used by cable manufacturers and installers of telephone cables, power cables, and jelly filled cables. Can also be used for terminating pipe and conduit.
| Catalog No. | Adhesive Coating | Expanded Minimum Diameter | Nominal Length | Recommended Cable Range | Recovered Maximum Diameter | Recovered Wall Thickness |
|---|---|---|---|---|---|---|
| 080EK025 |
0.02 in 0.508 mm |
0.8 in 20.32 mm |
3 in 76.2 mm |
0.25 - 0.75 in 6.35 - 19.1 mm |
0.25 in 6.35 mm |
0.14 in 3.556 mm |
| 137EK050 |
0.02 in 0.508 mm |
1.37 in 34.798 mm |
3.5 in 88.9 mm |
0.50 - 1.35 in 12.7 - 34.3 mm |
0.5 in 12.7 mm |
0.15 in 3.81 mm |
| 200EK075 |
0.02 in 0.508 mm |
2.1 in 53.34 mm |
3.5 in 88.9 mm |
0.75 - 2.00 in 19.1 - 50.8 mm |
0.75 in 19.05 mm |
0.15 in 3.81 mm |
| 270EK087 |
0.02 in 0.508 mm |
2.7 in 68.58 mm |
7 in 177.8 mm |
0.87 - 2.60 in 22.1 - 66.0 mm |
0.87 in 22.098 mm |
0.16 in 4.064 mm |
| 380EK150 |
0.02 in 0.508 mm |
3.8 in 96.52 mm |
4.5 in 114.3 mm |
1.60 - 3.75 in 40.6 - 95.3 mm |
1.5 in 38.1 mm |
0.18 in 4.572 mm |